YOUR PREFERRED PARTNER
SINCE 1981

PRIMARY VOLTAGE : 230 V | SECONDARY : 400 V + N

Options :
REACH_Compliance RoHS2_Compliant
Ref.
11
IP
Montage Rail Din
Power (kVA)
0,04
Primary terminals (mm2)
2,5
Secondary terminals (mm2)
2,5
Dimensions (mm) (W / H / D)
90 / 95 / 105
Mounting (mm) (w / d / hole diameter)
90 / 105 / 105
Core losses (W)
3
Copper losses (W)
3
Short-circuit voltage (%)
-
Weight (Kg)
1,8
Inrush current (In)
-

An autotransformer is a transformer consisting of a single winding per phase, the secondary winding being part of the primary winding.

In the case of a step-down autotransformer, the current to the windings entirely flows through the primary winding and a branch at a given point defines the secondary output. These products are used to precisely adapt the value of the rated voltage. Thanks to the reversibility option, autotransformers can be used both to raise or to lower voltage. They do not allow to isolate, modify the grounding scheme nor protect against electrical disturbances. One of the characteristics of this range is a significant increase in efficiency but also in short-circuit current. Each product of the range is available with or without housing, with or without options depending on your request. Optimising the weight and size of the autotransformer enables to reduce costs and provide you with a compact and competitive product. As with all our products, each transformer is individually tested and each batch is delivered with its control report.

Compliance

Our three-phase autotransformers comply with the norm IEC 61558-2-13 until 10 kVA and IEC 60076-11 from 12 kVA / EC marking / EMC compatible/ REACH / ROHS 2.

Connection

Three types of connection exist depending on the power rating of the product :

- screws,

- spring terminals,

- screw terminals.

Standard technical features

- Power rating: from 0.63 to 250 kVA

- Frequency: 50/60 Hz

- Dry-type with natural air cooling

- Neutral point

- YY connection

- Lifting rings from 15 kg

- Temperature class H (45° environment)

- Available without housing, with IP23 housing or other on request

- Altitude: up to 1,000m

- Isolation voltage between primary winding and earth: 3,000V

Mounting drawing

Nu
IP23 housing
This site uses cookies and gives you control over what you want to activate Accept all Personalize